B&K 50 Series II Uživatelský manuál stáhnout pdf (Strana 47)

From the SYSTEM menu, browse and select Communication and press . The following

screen will appear.

RS-232

Follow the steps below to configure the instrument for RS-232 operation:

1. Select RS-232 and press to set to RS-232 for remote communication. The

following display will be shown:

2. 4800 is the baud rate; 8 is the data bits; N is the parity; 1 is the stop bit; Addr… is for

address.

3. Use the and keys to select between each serial settings, and use

keys to change the settings.

4. The following setting options that can be used:

Baudrate: 4800, 9600, 19200, 38400, 57600, 115200*

Data bits: 8

Parity: N (None), E (Even), O (Odd)

Stop bit: 1

Flow control: NONE, CTS/RTS, XON/XOFF

Note: The default is 4800, 8, N, 1, NONE.

*Setting the baud rate to 115200 may provide unstable results during remote

communication. Select a lower baud rate if communication errors occur.

RS232

4800 , 8 , N , 1 , NONE

COMMUNICATION

RS232 USBTMC GPIB

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 101 102

Žádné komentáře

B&K 50 Series II Uživatelský manuál Strana 47