
70
Hand-held Analyzer 2250 Light – User Manual
Default Gateway
Address to a gateway for routing to another network
Selectable if Set IP Address = Manually
Preferred DNS
The IP address of the primary DNS server
Alternate DNS
The IP address of the secondary DNS server
MAC Address
The MAC Address of the network adaptor (LAN or WLAN) in use. MAC (Media
Access Control) Address is a unique identifier assigned to the network adaptor. This
field is for information only
Status
The status of the network connection, either Operational or Non-operational:
• Operational: the network adaptor can be used for a connection
• Non-Operational: the network adaptor cannot be used
Parameters for Wireless LAN Only
Name
Name (SSID) of the network you want to connect to. Update the name either by:
• entering a name directly, or
• tapping on the Available Networks and selecting a name from the list
Available Networks
Tap on the line to get a list of available networks. Tap on a name in the list to connect
to this network. The name is inserted in the Name line above this line. Each network
name is preceded with Signal Strength information, ranging from Excellent (displayed
as ‘•••••’) down to No Signal (displayed as no dots at all)
Security
Select the security as required by the network: Open, Shared, WPA PSK or WPA2 PSK.
Open and Shared are for WEP (Wired Equivalent Privacy) Infrastructure mode.
WPA PSK is for WPA (Wi-Fi Protected Access) with Pre-shared Key (also called Per-
sonal mode). WPA2 is an enhanced version of WPA
Encryption
Select the encryption as required by the network: None, WEP Enabled, AES Enabled or
TKIP Enabled. None is for Open security. WEP Enabled is for Open and Shared securi-
ty. AES and TKIP Enabled are for WPA PSK and WPA2 PSK security
Encryption Key
Insert the encryption key required by the network. The key will be displayed until you
press Enter, then it will be replaced by ' *** '
Komentáře k této Příručce